Medimeas Fully Automatic Microtome embodies the latest technology and perfectly harmonizes with an ergonomic design and user safety.
Fully Automatic Microtome MRM-AT Hand Padel & Foot Padel

Features

  • Motorised Feed & Sectioning
  • Motorised Sectioning at three different speeds
  • Four Sectioning Modes: Programmed, Continuous, Step & Manual
  • Section & Trimming Thickness Display
  • Section Counter
  • Automatic/Manual Control
  • Continuous Section/Single Section Control
  • Fast Forward/Backward Function
  • Section/Trimming Change Over
  • Automatic Memorization & Recovery
  • Antistatic Waste Tray for easy cleaning
  • Emergency Stop
  • Ergonomic Design
  • Supplied with standard Clamp, Super Cassette Clamp
  • Hand/Foot pedal operation
Fully Automatic Microtome MRM-AT Motorized Sectioning

Motorised Sectioning


This feature is available only in Fully Automatic Microtome. The powerful sectioning motor enables cutting of even harder specimens. Sectioning speed can be varied as per user application.
Fully Automatic Microtome MRM-AT Control Panel

Control
Panel


A smartly located control panel on the left side can control parameters like: Section Thickness Setting, Retraction Value, Fast Forward/ Fast Backward etc.
Fully Automatic Microtome MRM-AT Adjustable Retraction

Adjustable Retraction


The specimen retraction feature facilitates consistent section quality and prolongs the life of the cutting surface. The user can adjust the retraction value.
TECHNICAL SPECIFICATIONSVALUE
Section Thickness Setting0.5-100 microns
Setting ValuesFrom 0.5 - 5 micron in 0.5 micron increments
From 5 - 20 micron in 1 micron increments
From 20-60 micron in 5 micron increments
From 60-100 microns in 10 micron increments
Trimming Thickness1-600 microns
Setting Values1-10 micons in 1 micron increment
10-20 microns in 2 micron increments
20-100 microns in 10 microns increments
100-600 microns in 50 micron increment
Horizontal Feed24mm+/- 1mm, feed motion via step motor 4
Vertical Stroke70mm+/- 1mm
Specimen Retraction5 - 100 microns in 5 micron increment ; can be deactivated
Specimen OrientationX-Y 8 deg. & Z 360 deg.
Motorized Coarse Feed in 3 steps300 micron/sec and 800 micron/sec and 1800 micron/sec
Sectioning Speed0 to 420 mm/s +/- 10%
Max. Specimen SizeLarge Standard Clamp : 50 x 50 x 30 mm, Super Cassette Clamp : 60 x 40 x 15 mm
Specimen Clamp Orientation360 degrees
Nominal Voltage220-240V
Nominal Frequency50-60 Hz
Power Draw200VA
Dimensions
Width (including hand wheel)580mm
Depth (including waste tray)360mm

For more information about MRM-AT Fully Automatic, prices and delivery times, write to us at contact@medimeas.com or fill in the contact form in the link below.