Medimeas Fully Automatic Microtome embodies the latest technology and perfectly harmonizes with an ergonomic design and user safety.
Features
- Motorised Feed & Sectioning
- Motorised Sectioning at three different speeds
- Four Sectioning Modes: Programmed, Continuous, Step & Manual
- Section & Trimming Thickness Display
- Section Counter
- Automatic/Manual Control
- Continuous Section/Single Section Control
- Fast Forward/Backward Function
- Section/Trimming Change Over
- Automatic Memorization & Recovery
- Antistatic Waste Tray for easy cleaning
- Emergency Stop
- Ergonomic Design
- Supplied with standard Clamp, Super Cassette Clamp
- Hand/Foot pedal operation
Motorised Sectioning
This feature is available only in Fully Automatic Microtome. The powerful sectioning motor enables cutting of even harder specimens. Sectioning speed can be varied as per user application.
Control Panel
A smartly located control panel on the left side can control parameters like: Section Thickness Setting, Retraction Value, Fast Forward/ Fast Backward etc.
Adjustable Retraction
The specimen retraction feature facilitates consistent section quality and prolongs the life of the cutting surface. The user can adjust the retraction value.
TECHNICAL SPECIFICATIONS | VALUE |
---|---|
Section Thickness Setting | 0.5-100 microns |
Setting Values | From 0.5 - 5 micron in 0.5 micron increments |
From 5 - 20 micron in 1 micron increments | |
From 20-60 micron in 5 micron increments | |
From 60-100 microns in 10 micron increments | |
Trimming Thickness | 1-600 microns |
Setting Values | 1-10 micons in 1 micron increment |
10-20 microns in 2 micron increments | |
20-100 microns in 10 microns increments | |
100-600 microns in 50 micron increment | |
Horizontal Feed | 24mm+/- 1mm, feed motion via step motor 4 |
Vertical Stroke | 70mm+/- 1mm |
Specimen Retraction | 5 - 100 microns in 5 micron increment ; can be deactivated |
Specimen Orientation | X-Y 8 deg. & Z 360 deg. |
Motorized Coarse Feed in 3 steps | 300 micron/sec and 800 micron/sec and 1800 micron/sec |
Sectioning Speed | 0 to 420 mm/s +/- 10% |
Max. Specimen Size | Large Standard Clamp : 50 x 50 x 30 mm, Super Cassette Clamp : 60 x 40 x 15 mm |
Specimen Clamp Orientation | 360 degrees |
Nominal Voltage | 220-240V |
Nominal Frequency | 50-60 Hz |
Power Draw | 200VA |
Dimensions | |
Width (including hand wheel) | 580mm |
Depth (including waste tray) | 360mm |